MXBAOHENG Sandblaster Portable Pressure Washer Pneumatic Blasting Nozzle Sandblasting Rust Removal for Air Compressor (6mm ID Nozzle)

Package Contents: sandblaster*1, 2m abrasive hose*1, suction feed nozzle*1. Compressor Power: A minimum 3 kW air compressor is recommended for optimal performance. Abrasive Grit Range: Compatible with 36 to 120 grit—lower numbers produce coarser finishes, while higher numbers create smoother surfaces. Air Pressure & Hose Setup: Adjustable pressure depends on compressor power; insufficient power reduces airflow. Longer hoses require larger diameters to maintain proper flow. Working Principle: The system uses compressed air to create suction, drawing abrasive media through the hose and propelling it via the nozzle for surface treatment. Performance Tip: For large or tough surfaces, use a pressure pot system—it delivers higher abrasive volume, consistent flow, faster speed, and stronger impact.

• Abrasive Media：The abrasive media must be dry sand or water-mixed sand (for wet blasting).
• Application Scope：The sandblasting machine requires a pressurized blast pot and is designed for aggressive surface treatment on high-hardness workpieces.
• Durability：The nozzle is constructed from silicon carbide, offering significantly higher wear resistance than stainless steel nozzles.
• Nozzle & Orifice Compatibility：A Φ6 mm nozzle requires a 3 mm air orifice, while the Φ8 mm version pairs with a 4 mm orifice for optimal airflow.
• Sand Requirements:Any type of sand can be used for blasting. River sand is acceptable but requires sifting to remove impurities.